• Our experts are familiar with your industry and requirements
  • Our global network ensures we are close at hand wherever and whenever you need us
  • We have the expertise and tools to provide you with the best possible support and advice
 Contact us now
Your benefits

High-performance bus
Transmission rate of 48 Mbit/s – Very fast response time of up to 20 μs – One terminal module for all signal and function modules

Ease of installation/maintenance
Easy installation due to secure sliding mechanism – Click connection for quick mounting of the shield connection on the module – Coding to prevent from mixing up modules, etc.

Space-saving connection technology
Space-saving, step-shaped wiring level with spring clamp technology – Easy module replacement due to upright wiring – High modularity due to 2-, 4-, 8-channel modules

Clear labeling
Labeling strips for individual marking per channel – Status LEDs with direct assignment on the labeling strip – Pin assignment and wiring diagrams on each module

Clear status and diagnostic displays
Display of diagnostics and channel states via LEDs – Clear assignment and readability of channel states – Detailed diagnostics of each electronics module in the system

MOVI-PLC® I/O system C – Our portfolio

Module Description Properties Data sheet
OCE12C Bus coupler
  • EtherCAT® (SBusPLUS) bus coupler
 To data sheet
OCC11C Bus coupler
  • CAN bus coupler (SBus)
 To data sheet
Module Description Properties Data sheet
ODI24C Digital input module
  • 2 × DI
  • DC 24 V
  • Input filter time delay parameterizable 2 μs...3 ms
  • ETS function with µs timestamp
 To data sheet
ODI42C Digital input module
  • 4 × DI (fast)
  • DC 24 V
  • Input filter time delay parameterizable 2 μs...4 ms
 To data sheet
ODI43C Digital input module
  • 4 × DI
  • DC 24 V
  • 2/3 wire connection
 To data sheet
ODI81C Digital input module
  • 8 × DI
  • DC 24 V
 To data sheet
ODO21C Digital output module
  • 2 × DO
  • DC 30 V
  • AC 230 V
  • 3 A
  • Electrically isolated per channel
  • Relay
 To data sheet
ODO41C Digital output module
  • 4 × DO
  • DC 24 V
  • 2 A
 To data sheet
ODO81C Digital output module
  • 8 × DO
  • DC 24 V
  • 0.5 A
To data sheet
ODO82C Digital output module
  • 8 × DO
  • DC 24 V
  • 0.5 A
  • NPN
To data sheet
Module Description Properties Data sheet
OAI42C Analog input module
  • 4 × AI
  • 16 bit
  • 0(4)…20 mA current
 To data sheet
OAI41C Analog input module
  • 4 × AI
  • 16 bit
  • -10 V…+10 V voltage
 To data sheet
OAI44C Analog input module
  • 2 × AI
  • 16 bit
  • -80 mV...+80 mV voltage
  • TC type J, K, N, R, S, T, B, C, E, L
  • Reduced parameter bytes
 To data sheet
OAI45C Analog input module
  • 4 × AI
  • 16 bit
  • 0…3000 ohms resistance
  • Resistance measurement 2-, 3-, and 4-wire
  • Pt100, Pt1000, NI100, and NI1000 resistance temperature transmitters
 To data sheet
OAO42C Analog output module
  • 4 × AO
  • 12 bit
  • 0(4)…20 mA current
 To data sheet
OAO41C Analog output module
  • 4 × AO
  • 16 bit
  • -10 V…+10 V voltage
 To data sheet
Module Description Properties Data sheet
OFI41C Safe digital input
  • 4 × SDI
  • DC 24 V
  • 0.5 A
  • Safety
 To data sheet
OFO41C Safe digital output
  • 4 × SDO
  • DC 24 V
  • 0.5 A
  • Safety
 To data sheet
Module Description Properties Data sheet
OSM11C Analog input DMS
  • Direct connection of a full resistance bridge (DMS) or load cell
  • 4- or 6-wire connection
  • 16 (24) bit resolution
  • Absolute accuracy Basic error ±0.1 % (± 0.01 %)
  • Onboard current supply 2V5, 5 V, 7V5, 10 V and 12 V
 To data sheet
OSM12C SSI module
  • SSI - Encoder, Master or Slave operation
  • Encoder frequency 125 kHz – 2 MHz
  • µs timestamp function
  • Alarm function
  • Diagnostic function
 To data sheet
OSM13C Counter module
  • 1 × counter 32-bit (AB) DC 24 V
  • up to 400 kHz
  • 1 × DO, DC 24 V for comparison function
  • 0.5 A
 To data sheet
OSM14C Counter module
  • 1 × counter 32-bit (AB); DC 5 V
  • up to 2 MHz (differential signal)
  • comparison function
 To data sheet
OEM12C Energy measurement module
  • AI 1 × 3 Ph
  • 230 / 400 V
  • 3-phase and N conductor
  • Current range 1A (expandable via current transformer)
  • Remanent storage of energy values; Diagnostic function
  • Resolution measured value 24 Bit
  • Existing measured quantities: Voltage and Current, Electrical power, Electrical work, Harmonics, Phase shift cos phi, Frequency
 To data sheet
ORS11C RS422/485 Interface
  • RS422/485 interface
  • Protocols ASCII, STX/ETX, 3964(R) and Modbus RTU (Master, Slave)
 To data sheet
Module Description Properties Data sheet
OPV81C Potential distributor
  • 8 × DC 24 V terminals
 To data sheet
OPV82C Potential distributor
  • 8 × DC 0 V terminals
 To data sheet
OPV41C Potential distributor
  • 4 × DC 24 V terminals
  • 4 × DC 0 V terminals
 To data sheet
OPM11C Power supply module
  • DC 24 V input voltage
  • 10 A
  • Polarity reversal protection
  • Overvoltage protection
 To data sheet
OZB11C Bus cover
  • 1 piece
 To data sheet
OZS11C Shield bus carrier
  • 10 pieces
 To data sheet

Ready for anything with MOVI-PLC{{®}} I/O system C

In combination with the new MOVI-C® CONTROLLER portfolio, the product portfolio of SEW-EURODRIVE and external field units provides for an ideal interaction. As a comprehensive solution, the I/O system combines high performance and the latest functions with a well thought-out mechanical concept.

EtherCAT® and CANopen interface modules are available for data exchange with the controller when using this solution. The I/O modules are equipped with a power module for power supply and support up to 64 electronics modules on the backplane bus.

A module unit consists of a terminal module and an electronics module. These are connected with a secure sliding and locking mechanism. The terminal module combines clamps, a fixture for the electronics module and the backplane bus connector. In case of servicing, only the electronics module is exchanged by simply pulling it out of the terminal module – the wiring and mounting on the 35 mm DIN profile rail remains the same. The electronics modules can be supplied with voltage and/or divided into separate potential groups by using additional supply modules. The terminals are arranged on the terminal module in a step-shaped manner using the proven and particularly safe contacting spring-clamp technology in this way enabling fast, clear and safe wiring. The integrated status LEDs and the labeling strips on the front of the electronics modules ensure a channel-specific, clear assignment and readability of channel states. The backplane bus concept with a speed of 48 Mbit/s makes for very short response times.

Contact form Worldwide locations

By activating the zip code search, data is transferred to the USA by Google. For more information, see our privacy policy.