Properties & technical data
Benefits & areas of application
Communication
Digital motor and data integration
MOVIKIT® software modules
Functional safety
Further options
Topologies
Product labels

Properties

Motor design

Synchronous and asynchronous AC motors with/without an encoder
Asynchronous motors with LSPM technology
Synchronous and asynchronous linear motors

Degree of protection: IP10, IP20 optional (only with power connectors plugged in for grid and motor)

Interference emission: Limit value class C2 to EN 61800-3. The interference suppression level can be improved with relevant measures. You will find further information about this in the product manual ("EMC-compliant installation according to EN 61800-3" section).

Connections: Spring-loaded terminals up to 7.5 kW units

Further options

Control modes: U/f, VFC^Plus, ELSM^®, CFC
Torque, speed or position control
Plug-in and scalable keypads or MOVISUITE^® engineering software for startup
MOVIKIT^® software modules for easy startup
Portable memory module for easy device replacement without engineering software

Selected technical data

Close table

Technical data	Nominal line voltage V	1 × AC 200 – 240 3 × AC 200 – 240 3 × AC 380 – 500	Sizes 0S – 0L 0S, 0L, 3 – 6 0S, 0L, 3 – 8
	Nominal power kW	0.25 – 315
	Overload capacity	150%

We have stored a table for you here.

Show table now

All technical data and documents about MOVITRAC® advanced

The benefits for you

Save time
thanks to the electronic nameplate and use of preconfigured MOVIKIT^® software modules.
We've kept things simple
by ensuring the device can be replaced during servicing without an engineering PC and by storing all device data in a portable memory module.

You keep your options open
because the inverter can be connected to standard control systems and supports various fieldbus protocols.
You remain flexible
thanks to configurable functional safety – from the integrated STO safety function to higher-level safety functions.

MOVITRAC^® advanced is highly versatile

Close table


Hoists	Horizontal/vertical materials handling technology	Materials handling technology

We have stored a table for you here.

Show table now

Integrated communication interfaces

Binary and analog inputs
PROFINET
EtherNET/IP^TM
EtherCAT^®/SBus^PLUS

Modbus TCP
EtherCAT^® CiA402
POWERLINK CiA402

Digital motor and data integration

Single-cable technology for power supply and data transfer with digital encoder for synchronous and asynchronous motors

In fact, only one hybrid cable is required and installed here for the data connection between inverter and motor, and the MOVILINK^® DDI digital data interface transfers the power, brake and diagnostic data to the motor.

Find out more

MOVIKIT^®software modules in the "Drive" and "Motion" categories can be used in conjunction with MOVITRAC^® advanced. The "Drive" category includes MOVIKIT^® software modules that are operated directly on the MOVITRAC^® advanced standard inverter:

MOVIKIT^® Velocity Drive: MOVIKIT^® Velocity Drive allows you to use applications with velocity control and a standardized fieldbus interface.
MOVIKIT^® RapidCreepPositioning Drive: MOVIKIT^® RapidCreepPositioning Drive is a software module for implementing classic "rapid/creep speed positioning" without a motor encoder.

MOVIKIT^® Positioning Drive: MOVIKIT^® Positioning Drive enables positioning applications with a standardized fieldbus interface.

Mehr zu MOVIKIT® erfahren

Different functional scopes are available, depending on the functional safety option selected (CSO, CSB or CSL). The table below provides an overview.

Functional safety overview

Close table

Hardware	MOVISAFE^® …/CSO/…	MOVISAFE^® …/CSB/…	MOVISAFE^® …/CSL/…
Safe inputs	-	4	4
Safe outputs	-	-	1
Safe stop function	STO PL d	STO PL d, SS1c	STO PL d, SS1c, SS1b
Safe brake control	-	-	SBC
Safe motion	-	-	SLS, SSM
Safe direction of rotation	-	-	SDI
Safe communication	-	PROFISafe, FSoE	PROFISafe, FSoE
Safe encoders	-	-	EI7C-FS

We have stored a table for you here.

Show table now

STO in PL d integrated in the basic unit (can only be deselected if using the "binary and analog inputs" unit design)
Configurable safety functions such as SBC, SDI and SLS (availability depends on functional safety option)
Safe communication configurable via PROFIsafe/PROFINET (FSoE – Fail Safe over EtherCAT^® in preparation)

Available options

Keypads

Various keypads with different functional scopes are available.

Find out more

Memory module
All device data (parameter and configuration settings) is always stored on the memory module and is kept up to date. If a device needs to be replaced, the system can be started up again in next to no time without additional tools by simply removing the memory module from the old device and plugging it into the replacement.

Diagnostic module
The CDM11A diagnostic module creates the interface to the MOVISUITE^®engineering software. The module also contains two 7-segment displays for displaying the device status. In addition, the module is required for use of the CBG11A and CBG21A keypads.

Mounting plates

Sub-mounting plates for sizes 0S and 0L, including pre-installed braking resistor – for space-saving mounting of braking resistors underneath the inverter.

Shield plate extension – for space-saving mounting of e.g. SEW brake rectifiers or multi-level terminal blocks.

Topologies

From control technology to inverters and drives, whether centralized or decentralized, there are no language barriers with any of the components from the MOVI-C^® modular automation system.

Plan the design of your machines or systems with a single control, communication or installation topology. Our hardware and software will slot seamlessly into place and simply get things moving.

Even when it comes to communication know-how, the standard solution has no limitations. Whatever control or communication topology you specify, MOVITRAC^® will have the necessary interface built and make light work of controlling the motor assigned to it.